
About this product
The Sarvision Pipescan is designed to examine underwater pipe cross-sections. Unlike sonar intended for wide-area scene imaging, it uses a narrow vertical acoustic beam for targeted profile measurement. The associated software supports cross-section calculation and three-dimensional pipeline reconstruction, allowing captured contours to be assessed and documented spatially.
A dual-beam configuration is standard on the Sarvision Pipescan. Full-circle and sector scans allow adaptation to the required measurement area. The unit operates at 1.2 MHz and covers ranges from 1 to 10 m. Its oil-filled, sealed construction has no external rotating parts, reducing the risk of sediment blocking bearings or lines and vegetation becoming entangled. The Ethernet interface simplifies data connection to a host system.
Applications Measurement of internal contours and cross-sections in water-filled pipes, and geometric documentation of pipeline sections.
Avoid prolonged direct sunlight. Check for and remove marine growth regularly; rinse with fresh water and dry after use. Return for repair if cracks or oil leakage are found. Specify the LT option for long-term underwater deployment.
Technical specifications
| Operating frequency | 1.2 MHz |
|---|---|
| range | 1–10 m |
| Beam configuration | Dual beam as standard |
| Range resolution | 2 mm |
| Scan speed | 0.1–360°/s; up to 200 lines/s |
| Scan mode and signal | Full circle or sector; CW or CHIRP, automatic/manual |
| Depth ratings | 300 m or 1,500 m; specify when ordering |
| Power supply and consumption | 12–36 VDC | average approx. 3 W | peak <20 W |
| Interface | 100-Mbit/s Ethernet |
| Materials | Engineering plastic, composites and 316 stainless steel |
| Dimensions Ø × H | 97 ±1 × 74.5 ±1 mm; excluding cables |
| Weight in air / water | 770/220 g; excluding cables |